HYLO-VISION Safedrop 0.1% eye drops, 2x10 ml

Instructions for use for HYLO-VISION Safedrop 0.1% eye drops, 2x10 ml

Detailed instructions for HYLO-VISION Safedrop 0.1% eye drops, 2x10 ml

Field of use

HyloVision Safedrop 0.1% eye drops (pack size: 2x10 ml) are a sterile preservative -free wizard in the innovative Safedrop® system, a multi -socket container that is co -developed by omnivision. It serves the improved long -lasting humidification of the surface of the eye and is well suited for wetting hard and soft contact lenses while wearing. This significantly improves the comfort of the contact lenses.

Mode of action

HyloVision Safedrop 0.1% eye drops (pack size: 2x10 ml) protect and moisten the surface of the eye intensely and long -lasting and makes it sliding, especially with stronger and chronic dryness. Its viscoelastic properties ensure an even, stable and long -lasting tear film without impairing seeing. It causes a long -lasting relief of the symptoms of drought, irritation and slight irritation, especially in environmental stress, e.g. through air conditioning systems, wind, cold, dryness or air pollution, for example through cigarette smoke or in the case of tiredness and visual stress through intensive seeing, e.g. on computer screens, microscopes or long car journeys or when wearing hard or soft contact lenses or during diagnostic interventions on the eye. Likewise, taking certain medicines (such as antibaby pill, anti-allergic, psychotropic drugs, sleeping pills) and medical interventions on the eye (e.g. Lasik-or refractive operations) can play a role in the development of dry eyes.

Active ingredients / ingredients / ingredients

HyloVision Safedrop 0.1% eye drops (pack size: 2x10 ml) contains:

Sodium hyuronate (0.30 %), Sodium citrate, sodium chloride, citronic acid, cleaned water

Contradictions

In the case of known hypersensitivity to one of the above -mentioned ingredients, this product should not be used.

dosage

Application recommendation of HyloVision Safedrop 0.1% eye drops (pack size: 2x10 ml):

Step 1: Remove the protective cap before each application.
Step 2: Please run several pressure movements before the Safedrop® bottle is used for the first time before the first drop is produced. Keep the bottle upside down according to the illustration. Please avoid any contact with the fingers and the eye.
Step 3: Hold the bottle as shown in the picture. Make sure that the thumb on the latitudes, abrutscasproof, round finger pad rests.
Step 4: bring your head into a neck position, pull the lower eyelid down with your free hand. If necessary, drizzle one to two drops Hylo-VISION® Safedrop® Gel into the open conjunctive sack in which you operate the pump mechanism once or twice. Make sure that the bottle is kept vertically. Slowly close your eyes so that the drops can spread evenly on the surface of the eye. Alternatively, when the drops are applied with contact lenses, put one or two drops on each contact lens before put them in your eyes instead of putting the drops directly in your eyes.

Hylo-VISION® Safedrop® GEL can be used several times a day.
If your symptoms stop during the application of Hylo-VISION® Safedrop® Gel, please see your ophthalmologist.

Hints