Gelodurate inhaler N for gelodurate ointment, 1 pcs

Product features:

They have opted for the proven inhalation for the supportive treatment of colds. The GELODURAT® inhaler N is a device for water vapor inhalations for improving the condition for control diseases of the respiratory tract (such as runs, hoarseness and uncomplicated bronchial katarrh). The heat increases the concentration of the essential oil released from the ointment and strengthens the soothing effect. You feel it immediately. So good inhalation and heat also do, please read our instructions carefully before the application.

Structure of the Geloduraf-Lnalator N:
The Gelodurat®-Lnhaler N consists of a lower part with handles, a middle part and the breathing mask. The gelodurate inhaler N is assembled as follows: The middle part is set to the lower part and connected to the right clockwise via a rotation. The breathing mask is inserted laterally into the joint of the middle part. Please note the position of the survey on the breathing mask, the mask tend as far down as possible. It is important that the breathing mask can be pushed easily and without resistance. Now the survey can be pushed into the notch to avoid slipping the breathing mask can now be set individually. To open the inhaler, hold the lower part to the grip handles and turn the center part with breathing mask (top) to the release of the lock to the left counterclockwise. The top can then be effortlessly removed. To remove the breathing mask from the middle part, please tilt the position all the way down, so that the survey is out of the notch. Now you can pull out the breathing mask on the side. Please clean the gelodurate inhaler n before the first use (as under "Cleaning" described).

Inhalation with Gelodurat Lnalator N:
The lower part is filled about half with hot (about 80 ° C) water. Due to the double-walled construction, the water temperature is held over the inhalation period. Set the lower part to a tapping, straight underlay and give geloduraf ointment according to the useful information into the water. Hold the lower part, set the middle part with a breathing mask and turn it to the right clockwise until the lock snaps into place. Now you can set the breathing mask according to your needs. Inhale according to the information of the use information contained in the pack of the Geloduraf ointment. With the Geloduraf-Lnalator N, a targeted inhalation can be done, since the mouth and nose are held in the breathing mask. The application of the inhaler is very pleasant due to the cuddly edge of the breathing mask. Feel the soothing effect of heat and essential oil.

Please note the following safety instructions before use:
- Always handle the filled GELODURAT®-Lnhalator N always to avoid scalding with the hot water.
- Leave children with the filled Geloduraf-Lnhaler N never unattended.
- Support your child at inhaling.
- Carefully approach the inhalation opening, the vapors can still be very hot. If the water vapor with the essential oil at the beginning is still considered too hot or intense (especially children!), Can be waited for a moment or the distance between nose and inhaler opening can be varied.
- If the Gelodurate Inhalator n is filled, please do not cover the holes as well as the breathing mask with your hand.
- When biting, hot water can spray out of the openings.
- The GELODURAT®-Lnhalator N must be on a tapping and straight underlay when filling and inhaling.
- Please keep the Geloduraf-Lnalator n when setting the breathing mask to the grip handles.
- After inhaling, do not expose a cold or draft, this can lead to an aggravation of the disease symptoms.
- After each inhalation, especially before transfer to another person, please clean the gelodurate inhaler n.
- Please take the filled Geloduraf-Lnhaler N for transport only on the two handles. Wear the Geloduraf-Lnalator N always upright and without momentum; Do not wear it at the top.
- Please do not heat the inhalation solution in the microwave.
- If you determine damage to the Geloduraf-Lnalator N (eg. B. cracks or jumps), then please do not use it anymore.

Cleaning the Gelodurate Inhaler N:
If the inhalation is finished, wait until a sufficient cooling is done. Then, the geloduraf-lnalator n is open as described, and the content empties. In order to remove the breathing mask from the middle part, it must first be adjusted downwards. Now pull out the breathing mask from the side of the middle part laterally. Subsequently, all parts of the gelod inhaler N are cleaned with commercially available detergent. You can also enter the Geloduraf-Lnalator N also in the dishwasher. After drying, you can store your Geloduraf-inhalator N for protection against dust in the box.

Application of the Geloduraf Inhaler N in the Clinic / Career:
Insert the Geloduraf-Lnalator N patient-specific.

Source: Information of the leaflet
Status: 10/2015