FFP2 Respiratory Mask, 5 pcs

Product features:

Product and Model Designation: Disposable Respirator FFP2, Model B13086
Manufacturer: Samding Craftwork Co., Ltd.
Sterility: Unsteril
Color white
Material: nonwoven fabric
Washable: no

FFP2 breathing masks have properly undergo the conformity procedure in accordance with PSA Regulation (EU2016 / 425). Accordingly, they carry a CE mark according to DIN EN 149: 2001 + A12009. The statutory EU conformity statement of the manufacturer and the type examination certificate of an authorized test center (NB 2163) are available.

Certificate of the FFP2 respirator

Purpose of the mask: Masks serve to protect others as well as the own protection.
Texture of Masks: Masks consist of 4 layers.

Use:
The masks may also be sold as personal protective equipment on industry and crafts. It protects against solid, aqueous and non-volatile liquid aerosols until 10 times the permissible workplace limit value
As FFP2 breathing protection mask without exhaust valve, the mask is also suitable for pandemic precaution!

Notes for users:
The best protection against potential virus transmission continues to provide the consistent distance from other, potentially virus-carrying persons. Nevertheless, the physical barrier, which represents the correct wearing of a mouth-nose mask, can provide a certain protection function.

Persons who want to wear a corresponding mask should therefore be considered the following rules:

• The masks should only be used for private use.
• The common hygiene regulations, in particular the current recommendations of the Robert Koch Institute (www.rki.de), the Federal Center for Health Enlightenment (www.infektionsutschutz.de) must be observed.
• Even with a mask, the distance recommended by the WHO should be adhered to at least 1.50 m to others.
• When putting on a mask, make sure that the inside is not contaminated. The hands should be thoroughly washed thoroughly with soap.
• The mask must be properly placed over mouth, nose and cheeks and at the edges as close as possible to minimize the penetration of air on the sides.
• At first use, it should be tested whether the mask leaves enough air to hinder normal breathing as little as possible.
• A humidified mask should be removed immediately and, if necessary, be replaced.
• The outside of the used mask is potentially exciting. In order to prevent contamination of the hands, it should not be touched as if as possible.
• After discontinuing the mask, the hands should be thoroughly washed under compliance with general hygiene rules (at least 20-30 seconds with soap).

If available, all manufacturer's instructions should be observed.

Use:
1. Place the part of the mask with the nose clip over the nose. Then pull the mask over your chin.
2. After pulling the ear hangers over the ears, position the mask until it is comfortable.
3. Press both sides from the center of the nose bracket to the face. You can move the nose bracket to fit on the nose back.
4. Check the stop of mask and face.

Source: Information of the manufacturer; Own information
Status: 01/2021